Rooftop solar
The studio's panels feed the printers first. A big order starts in the morning so the bulk of the hours land in the middle of the day, when the array is producing most.
Almost every piece we sell is printed from plant-based PLA*, a plastic grown from corn starch rather than pumped out of the ground. The printers themselves run off the solar array on the studio roof.
We are a small studio, but the choices are deliberate: a renewable material, sunshine instead of coal, and nothing printed until somebody actually asks for it.
* Occasionally a job needs something tougher than PLA. If that ever applies to your order we will tell you before we print it, and say why.
PLA starts as corn starch. It is fermented into lactic acid, polymerised into a filament and wound onto a spool. The carbon in it came out of the atmosphere while the corn was growing, which is the main reason we use it instead of ABS or PETG.
It also prints cooler. Our nozzles run around 215 °C with a 60 °C bed, where ABS wants 250 °C and a heated chamber, energy we would rather not spend on a letter bead. PLA is also the low-odour one, so there are no solvent fumes in the studio while an order prints.
And when a piece has done its job, PLA is built to go back to the earth. In a commercial composting facility it breaks down into biomass, water and CO₂, feeding the next crop of corn that makes the next spool. That is the loop we are aiming for, and it is why we are lining up a Brisbane composting partner for returned pieces.
A 3D printer is a heater with an opinion. Ours is powered by the panels on the roof.
The studio's panels feed the printers first. A big order starts in the morning so the bulk of the hours land in the middle of the day, when the array is producing most.
A 26-letter set takes most of a day, so we schedule those to run through the sunny hours rather than overnight on grid power.
Pieces are nested so several letters share one build plate, and jobs are grouped to cut down heat-up cycles, purge and scrap.
We print to order. There is no shelf of unsold alphabet sets in a storage unit somewhere, and nothing gets thrown out because a season ended. Your name is printed after you type it, in the colour you picked.
Shipping is paper and cloth: paper mailers, cotton pouches and recycled board, with no bubble wrap and no plastic tape on the box. The only plastic in the parcel is the thing you actually ordered.
Combined orders help too. Two name sets in one parcel is one delivery instead of two, which matters far more to the total footprint of a letter than the filament it is printed from.
Every batch teaches us something. Here is what is coming.
Spool ends, purge lines and the occasional failed print go into a box rather than the bin. Next step is a grinder, so they come back to the rack as new filament.
We are lining up a Brisbane composting partner to take customer returns, so a name that has been loved for years can go back to the earth instead of landfill.
Rather than buying offsets, we put the money into using less grid power: more panels, long prints in daylight, and printing only what is ordered.
Grouping pieces in the same colour means less purging between jobs, one of the reasons a single-colour set prints cleaner than a rainbow one, and a habit we are getting better at.
Ask us anything about the filament, the printers or where an order ends up. We would rather answer it than have you guess.